Tuberous begonias

Quick facts

Tuberous begonia flowers come in many different colors and shapes.

Use tuberous begonias to brighten shady spots in your yard.

Tuberous begonias are not hardy in Minnesota and can either be grown as annuals or their tubers can be overwintered indoors.

An orange tuberous begonia flower with dark green leaves in the background.
An orange tuberous begonia.

Tuberous begonias are popular for their beautiful flowers that come in a variety of colors and forms. Red, orange, yellow, white, salmon and pink blooms may be single or double and may be plain, ruffled or toothed. Their petals may have margins, crests or blotches of contrasting color.

Tuberous begonias bloom throughout the summer, thriving in shady spots where few other plants with long bloom periods and showy flowers can grow. They are often used as container plants on patios and porches, in hanging baskets, and as bedding plants.

Tuberous begonia species are native to tropical South America and southern Africa. Most varieties available in garden centers or though catalogs are hybrids with complex parentage, but all share the same growing requirements.

Planting

Yellow tuberous begonias in a mass planting with dark purple coleus in the background.
Tuberous begonias (‘Go Go Yellow’) planted in a shady, protected site

You can buy tuberous begonia plants in spring at garden centers or you can start tuberous begonias from tubers (see next section).  Once you have plants, choose a site for tuberous begonias that is somewhat protected from wind, where the soil is well-drained, and plants will be shaded during most of the day. Early morning and late afternoon sun will not harm them, but they need good indirect or dappled light at other times.

Although tuberous begonias must be grown in well-drained soil, they are not drought tolerant, so it's important to water them when it hasn’t rained. If they're growing in the shade of trees or in containers under a roof, you must pay even more attention to keeping the soil properly moist. Allow the soil in containers to become slightly dry before watering. Moss-lined wire hanging baskets work particularly well to provide adequate drainage.

Tuberous begonias are fairly heavy "feeders", so fertilize with a dilute balanced fertilizer throughout the growing season for best bloom and growth.

Starting begonia tubers

A tuberous begonia sprout in a terracotta clay pot.
A tuberous begonia tuber sprouting in a container.

In late winter or early spring, purchase tubers or start those you have stored. Tubers started in February should begin to bloom in June; those started in March or early April should bloom in July.

Plant the tubers in a flat of peat moss or vermiculite. If the stored tubers show no signs of disease, you can use the same medium in which they were stored. Otherwise, fill the flat with fresh peat moss or vermiculite. Find the upper surface of each tuber, the side with the depression or hollow. Plant the tubers right-side up in the flat, so the peat moss or vermiculite just covers them.

During this time, the tubers are very susceptible to rot, so it's important to keep the medium fairly moist, but not wet, and not to let water accumulate in the hollow part of the tuber. Place the flats where the temperature is around 70F, and they will receive indirect light. Supplemental lighting, such as grow lights, is not necessary during this stage of growth.

Transplanting to larger containers

Red-flowered tuberous begonias growing in a brown ceramic container that has decorative handles.
Tuberous begonias growing in a decorative container

Roots will develop from the bottom, sides and top of the tuber, and stems will sprout from the top. After about one month, the stems will be 1 inch tall. Once they have reached this size, it's time to repot the tubers into larger containers, either 5- to 6-inch pots, or their permanent summer containers. Providing supplemental lighting or moving the plants to a brighter location will help form short, sturdy stems rather than tall, leggy ones.

Thinning stems

Small tubers will produce small plants; large tubers, large plants. Flower size is not affected by tuber size, but by the number of stems on each tuber. If you would like bigger flowers, thin the shoots when they're about 3 inches tall. Small tubers should have two or three stems, large tubers three to six stems, so pinch off any extras.

Some varieties, such as those used in hanging baskets, are grown for quantity of flowers, not for large blooms. These should not be thinned. They will be bushy and bear lots of smaller flowers, especially if the tips of the stems are pinched in May or early June.

Hardening off

A pink tuberous begonia flower with many slightly ruffled petals.
A pink tuberous begonia flower with slightly ruffled petals.

To accustom the plants to outdoor conditions, begin hardening them off about two weeks before the last frost date. Move the plants outdoors on a warm day to a shaded, protected place. Bring them back in before temperatures cool off at night. The next day, put them out and bring them in again. Gradually move them out into brighter light and expose them to more wind, but continue to bring them in at night.

Once the weather has settled, the soil is warm, and all danger of frost is past (usually by late May or early June in Minnesota), transplant them to hanging baskets on the porch or out in the garden, or move containers to their permanent place on the deck or patio.

Storing tubers

Tuberous begonias will enter a dormant period no matter how they are grown, whether in a greenhouse or outdoors, so they are not suitable as year-round houseplants. (Some others, such as Rieger begonias, are a better choice as indoor flowering plants.) During the dormant period, begonia tubers must be stored indoors. Left in the ground during a Minnesota winter, they would be killed. To prepare the tubers for dormancy:

  1. Gradually reduce watering and stop fertilizing at the end of August. Some gardeners may choose to remove any flower buds that form in September to encourage dormancy and the storing of energy in tuber.
  2. Dig begonia tubers when the foliage starts to yellow, or after the first killing frost.
  3. Cut the stems to about five inches, and allow tubers to cure (dry) indoors at room temperature, out of direct sunlight, until the remaining stem pieces are dry and loose.
  4. Pull off stems and any roots or soil, but don't wash the tubers.
  5. Place the tubers in a perforated plastic bag filled with peat moss or vermiculite.
  6. Store in a cool, dark place at a temperature range of 40 to 50, much cooler than most basements. An insulated but unheated attic or three-season porch may be cool enough. A spare refrigerator can be an ideal place to store tender bulbs and other bulb-like plant parts, such as tubers.
  7. Check the tubers occasionally for rot, softening or withering, and discard bad tubers immediately.

Propagation

A large plastic pot filled with vermiculite with a water-filled clay pot in the center of the vermiculite.
A completed forsythe pot ready for cuttings.

Unlike potato tubers, you can't cut begonia tubers into pieces to produce more plants. Although some growers divide begonia tubers, they must make the divisions when the plant is actively growing, and the tuber pieces often become diseased and rotten.  It is easier for homeowners to propagate rooting cuttings or starting from seed.

Propagating by root cuttings

A common way to propagate tuberous begonias is to root cuttings. If you thin out the stems when they are about 3 inches tall, you can use those cuttings. Some gardeners cut a small piece of tuber with each shoot to increase the chances of the stem rooting, but the wound on the tuber may allow disease-causing organisms to attack the tuber.

Before you take the cuttings, prepare what is called a forsythe pot in which to root them. To prepare a forsythe pot:

  1. Take a 2- to 3-inch unglazed clay pot and cork the drainage hole in its bottom.
  2. Fill a 10-inch plastic pot with vermiculite.
  3. Push the clay pot down into the vermiculite of the plastic pot. There should be a 3-inch wide ring of vermiculite around the clay pot.
  4. Moisten the vermiculite, then fill the clay pot with water.
  5. Cut the stems to be rooted and insert them into the moist vermiculite.  
  6. Put the whole assembly into a clear plastic bag.
  7. Fasten the top of the bag to keep the air around the cuttings humid.
  8. Set the Forsythe pot in a warm place with bright indirect light.
  9. The clay pot is a water reservoir, so you will not need to water the cuttings as long as you keep it filled.

After two to four weeks, cuttings should be well-rooted. Open the plastic bag a little more each day for a few days to accustom the plants to normal humidity. Then plant them in pots, harden them off, and transplant them outside as described earlier. By September, small tubers will have formed, which you should cure and store just as you would larger tubers.

Propagating by seed

Tuberous begonias can also be propagated from seed, but the seeds must be started in December or January for summer bloom! Fill containers with fine-textured potting mix and moisten it. Press seeds onto the surface of the medium and cover them lightly with milled sphagnum. Moisten the sphagnum with a sprayer, then cover with glass or plastic wrap to keep moisture in.

At a constant temperature of 70, germination usually takes about ten days, but it can take as long as three weeks, especially if the temperature of the potting soil is lower than 70. Leave the plastic or glass on for one or two days after germination, then remove it.

Thin the seedlings to 2 inches apart. Bright light such as from a fluorescent grow light is helpful in producing sturdy seedlings.

When they become crowded, transplant them to larger pots, using a porous, well-drained potting mix. Harden the plants off, then plant them in hanging baskets, in larger containers, or directly in your garden.

Jill MacKenzie, Kristine Moncada

Reviewed in 2018

Share this page:

© 2018 Regents of the University of Minnesota. All rights reserved. The University of Minnesota is an equal opportunity educator and employer.